Jetking…my review on the best hardware institute in india

I am a proud pass out of Jetking, India’s leading Hardware and Networking training institute. This is not a general hardware institute which makes fake promises and does no stick to them. Jetking is one hardware institute which has trained over 4,00,000 students all over India, and this does not end there, people have managed to secure jobs and all of us batch mates are grateful to them.

I have read reviews about ex students and I personally feel, that everyone is just very content with what they have achieved in life, all thanks to Jetking. All of their alumini are placed in one of the best companies all over the globe, and mind you these were the same people who at one point of time, did not have the confidence to go up to people just fo a chat.

Their vocational training program is just splendid and phenomenal. The way the teachers chisel the students and train them to work in complex situations is just very motivating.

My view about Jetking just keeps getting better by the day, for everything that I have achieved now is on account of them. This is why I am writing a review filled with love and affection, and total 100 out of 100 review for Jetking.

It is indeed India’s number 1 hardware and networking training institute. My experience at Jetking as students is just very inspiring. I am very proud to say that I have secured a job, and I have even managed to buy a home, and that too on my account. Initially when I joined Jetking, I was low on confidence, I honestly did not believe in myself. I was not at all good at academics, I was slow and well honestly I felt very useless.

Fundamentals Of C Programming For Embedded Microcontrollers To Benefit Beginners

An embedded device is a structure that links previously programmed software on a microcontroller integrated in the computer hardware. The software program is set up on the microcontroller, the brainpower of the electronic gadget. Every embedded device performs one particular operation. A complicated gadget such as a personal digital assistant (PDA) or smartphone may have embedded controllers that can manage multiple tasks. Nevertheless, embedded devices are not as complicated or programmable as personal computers. C programming for embedded microcontrollers is one of the most common phenomena these days.

C is one of the most widespread software languages employed on embedded device controllers. One prominent advantage is because it belongs to a selected class of software languages that is able to function on 8-bit microcontrollers as well as 64-bit PCs, implying that a lot of computer developers can code C software program for personal computers and embedded systems alike. C can also make use of extremely uncomplicated commands to manage the device, releasing the fixed memory of the device to embrace numerous lines of code or parameters. Both microcontrollers like 8051 and digital signal processors can have code written in C language.

A programmer writes code in C on his/her PC. Then, the code is translated into the machine language using a compiler on the programmer’s PC to create a software program. The software program in the embedded device may be run through a simulator as well. Subsequently, it is replicated onto the controller with the help of a programmer. In the end, the controller is tried out on a test bed to make sure that it functions suitably.

C is regularly used in the construction of embedded devices. Embedded devices are seldom coded with the aid of the C++ since they hardly ever have the memory space required for the complicated C++. C# is irregularly applied on embedded Linux systems.

Bluetooth products are coded in C. An embedded microcontroller like one implanted in the web camera is commonly coded in C language. Microcontrollers programmed in this language have also been integrated in LED or light-emitting diode gadgets and liquid crystal display (LCD) screens. USB devices are programmed in C too.

Embedded systems are put into use to have a control on electronic appliances like DVD players, mobile phones, watches and medical equipment. Other such systems such as video cards and network switches have their presence in peripheral devices. The speed control mechanism in a car is an embedded system as well. These implanted systems are cheaper than complicated processors because of their straightforwardness and regular mass production.

Forex Robot Vs. Human Trader Who Will Win

Forex Robot vs. Human Trader Who will win?
Or is there any competition!
Can a Forex Robot out-trade a highly experienced human?
Can the Robot have the necessary intuition and savvy to ascertain when a trade is viable, or when to exit the trade?
A robot is mechanical in concept, its judgement calls are based not on emotion but on rational facts.
Admittedly the Human does have the ability to sense a good trade, the ability to instinctively know that the trade is not working out, the ability also and unfortunately to get it wrong.
Of course the Robot will not get it right all the time, but does this matter.
No, it does not matter and quite rightly.
What we ask of an Automated Forex Robot is that it maintains a forward and controlled slope upward of profitability. That it maintains a balanced approach to the trades, that it maintains a predictable money management and risk control policy.
The Robot does not suffer the problem of distraction, tiredness, the need for a break, and the lack of focus that comes from watching a computer screen endlessly.
The human trader may have instinct, intuition, savvy, experience and the ability to feel a good trade, but the Human is only Human, with all the foibles that this entails.
What I look for in my trading is profit in a controlled manner, the robot still will come up Trumps for this.
Of course, it depends on the Forex Robot, and how it is set up.
The Robot needs to be researched, demoed, and a plan formulated before going live.
I know from Personal experience that once you have reached this position, what is necessary then is to go live. Take note on my other articles on the website that state that this should be with the trading program hosted on a VPS host. We do need the program to remain live. We certainly do not want the computer to crash, hibernate; power down etc as sometimes happens with our personal computers and laptops.
Also, from personal experience it is vitally important to let the program run without human input. The desire to take a profit before the trade has reached its profit level always remains strong.
The program must take profits and must take losses.
What we must do is evaluate the results at the end of each 24 hour period. If it is making profit then our only decision is whether to increase the lots traded.
I, for one believe that the Robot will always beat the Human is terms of long-term sustainable profitability.
Please visit my website for further comment and updates re. The subject of Forex Robot Trading.

Error C1041724 Mounting Exchange Server Database

Exchange Server databases’ transactions are temporarily stored in transaction log files. At times, you need to remove these files manually, usually when the disk runs out of space or the circular logging is disabled. If you come to such situations, it is recommended to determine that the logs have been committed to database or otherwise will cause problems. The database usually shows Dirty Shutdown state in such cases. However, the other reason for this is that database is corrupt. If it is, you should look for Exchange Recovery solutions.

You can take the following situation when you try to mount an Exchange Server database. In an attempt of mounting the database, you might receive an error as below:

An internal processing error has occurred. Try restarting the Exchange System Manager or the Microsoft Exchange Information Store service, or both.

ID no: c1041724
Exchange System Manager

The mount operation fails after you receive this error message.

Cause

Error c1041724 can be encountered if you have run eseutil /p repair utility on the affected database. At this point if Eseutil log files remain intact and are not removed, the database can fail to start with the above error.

Solution

To isolate the issue, you need to proceed as follows:

1.You need to first check if eseutil /p command was run. To do so, you should run eseutil /mh command for pub1.edb and priv1.edb and check the repair count value. If it is other than ‘0’, this shows that the command was run.
2.From the previous step, you also need to check for the database consistency. If it exists in Clean Shutdown state, which shows that the log files have been committed, you can safely remove the log files from Exchange Server folder, Mdbdata folder to a backup folder and mount the database.
3.If the database shows ‘Dirty Shutdown’ state, it may be because either all the log files have not been committed yet or the database is corrupt. You can wait for sometime to determine if uncommitted transactions is the case. If not, the database is corrupt that you need to restore from backup or by performing soft recovery.

In cases when database remains corrupted with no access to a suitable backup, you can use third-party Exchange Server Recovery utilities. These special applications allow safe extraction of user mailboxes without any modification to the original content. Exchange Recovery utilities provide you interactive design plus impressive features to experience.

Stellar Phoenix Mailbox Exchange Recovery is a complete tool that repairs Exchange database repair systematically. It is a safe and powerful Exchange Server Recovery tool that supports Exchange Server 5.5, 2000 and 2003. The tool can restore mailboxes in individual .pst files, which can be directly accessed in Outlook. The software is enriched with a realistic approach to repair corrupted EDB file in each instance.

How is 3D printing technology used in Architecture and Medicine

D printing technology is used to manufacture prototypes, tools, and end-user parts directly from a CAD design. This printing technology offers unprecedented flexibility as it can create a part of any dimension out of any material. Some of the 3d printing materials used include metals, polymers, ceramics, composites, and many more. The 3D printing technology has complete control over material composition, surface texture, and micro-structure of the prototype. 3D printing technology also allows the user to construct prototypes using two different materials. >

Lets take a look at this amazing technology and how it has affected the field of architecture and medicine:

3D printing for Architecture

Architects know that there is nothing like a physical model of a building when it comes to displaying their work or design concept. Physical models also play an important role when it comes to explaining and convincing the customer while selling a project.

3D printers are affordable and high quality solutions for architects. Building a physical model requires great deal of expertise, precision, and time. 3D printing machines help designers focus on their building design, while the devices make 3D models of the project.

Many architects are not tech-savvy and are not used to operating complex devices. 3D printers do not require human intervention at any stage of the printing process. Architects just need to need to draw a CAD diagram of the project and instruct the 3D printer to build a 3D model. The 3D printer can print the model within a few hours, which can then be presented to the client.

3D printers are capable of producing of 3D models with accuracy and speed without compromising on the finer details of the architectural project. The price of desktop 3D printing machines is not that high and independent architects can also afford them.

3D printing for Medicine

The application of 3D printing technology can also be found in the production of medical devices. There are different 3D printing materials available that can be used to build real parts. For example, manufacturing hearing aids is a complex process because they are custom-fit devices and cannot be mass produced. 3D printing greatly helps in such matters where medical devices need to custom-fit a patient.

The future of the 3D printing technology is very bright. Market experts state that 3D printing technology will be affordable to the masses by the next decade. The prices of 3D printing devices are falling rapidly, and it is believed that the prices of 3D printers will drop by as much as 80% in the next 5-10 years. It will not be a surprise to see 3D printing devices in each household just like refrigerators, washing machines, and televisions.